Zigbee 3.0 USB Dongle Plus–ZBDongle-E
SONOFF Black Friday Sale:
$10 OFF $69+ with Code BF10 | $15 OFF $99+ with Code BF15 | $30 OFF $159+ with Code BF30
Extra Free Standard Shipping on SONOFF Orders Over $89, valid until Dec 10.
- Pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3 out of box
- Support smart home platforms like Home Assistant, openHAB, Zigbee2MQTT and so on
- Based on EFR32MG21
- +20dBm output gain
- Aluminum housing effectively reduces signal interference from peripherals
- Optional 1.5m USB extension cable for better signal range
Note: The ZBDongle-E supports the Green Power devices, If you want to add the Hue Zigbee Green Power device, you need to switch the channel of ZBDongle-E to 11/15/20/25 at your specific application.
SONOFF Zigbee 3.0 USB Dongle Plus can works with the devices below:
Router: ZBMINI smart switch, S40 Lite ZB, S31 Lite ZB smart plug, S26R2ZB smart switch
End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor
Click to view the difference between Dongle-E and Dongle-P
SONOFF ZBDongle-E is a universal Zigbee USB stick. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices, so you don't need to invest in different brands' Zigbee hubs, all you need is a universal gateway - ZBDongle-E!
The dongle plus has a wide range of supported devices, such as ZBMINI-L, SNZB01, SNZB02, SNZB03, SNZB04, S26R2ZB, S40 LITE ZB. Dongle Plus is pre-flashed with coordinator firmware, you can also flash router firmware to extend the network range.
Dongle Plus support a variety of common systems, like Linux, Ubuntu, Raspbian, Windows, macOS (Windows and macOS require corresponding driver installation).
Raspberry Pi (Linux) is recommended, if you use Windows or macOS, you need to install Driver first.
|Dimensions||111 × 40 × 17 mm|
DC 5V (100mA Max)
100% working and stable...
No issues what so ever
Worked with R-pi and home assistant
For my home assistant network and it's going good so far, learning alot and all it has to offer
The dongle was working out of the box with Openhab on Pi. The delivery was on time.
Easy integration, it works right away
Viene subito rilevata sul hub home assistant, facile anche da modificare il firmware. Non c'è paragone sul mercato per questo prodotto. OTTIMO rapporto prezzo qualità
It just works. Home Assistant found it straight away. I am using an Odroid N2 SBC as my HA hub.
Works like a charm, fully compatible with Home Assistant right out of the box.
easy integration into my home assistant delivery faster than expected. I recommend both the product and Itead. Really satisfied