SONOFF Zigbee Bridge Pro
$24.90
Free Standard Shipping on SONOFF Orders Over $89
【Supports adding up to 128 sub-devices】Zigbee Bridge Pro supports adding sub-devices increased from 32 to 128.
【Smart Home Security】Set up home security modes, such as home mode, away mode, and sleep mode. The bridge can be used as a local alarm.
【Local Smart Scene】Timing and scene linkage between Zigbee devices can be executed normally even if the network is disconnected.
【Wi-Fi & Zigbee Dual-protocol Support】Make communication between Zigbee devices and WiFi devices.
【Strong Connectivity, Limitless Possibility 】The Bridge supports to add ZigBee devices that SONOFF has released, like ZBMINI-L smart switch and S26R2ZB smart plug, making your home smarter.
NOTE: ZB Bridge-P can connect 26 sub-devices directly (10 end devices + 16 routers, or 26 routers). If you want to connect to 128 sub-devices, routers are required, and one router-device can expand to connect 20-32 sub-devices.
SONOFF Zigbee Bridge Pro can work with the devices below:
Router: ZBMINI smart switch,S40 Lite ZB smart plug, S31 Lite ZB smart plug, S26R2ZB smart plug
End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor
SONOFF Zigbee Bridge Pro is the updated Zigbee bridge that enables you to manage up to 128 sub-devices with larger capacity and stability, plug-in devices can act as Zigbee routers to extend the network range.
SONOFF Zigbee Bridge Pro newly added features like smart home security, local smart scene, and easy arm and disarm. You can customize 3 modes by setting different arming devices. The local smart scene always works well even Wi-Fi is disconnected. Built-in high-precision local RTC, a short power outage will not affect the time synchronization. Time schedule can return work once power restoration. Note that the local scene is for Zigbee devices only.
SONOFF ZBMINI-L smart switch, S26R2ZB smart plug, SONOFF Zigbee wireless switch, and sensors like temperature and humidity sensor-SNZB-02, motion sensor-SNZB-03, and wireless door/window sensor-SNZB-04 can be connected with the Zigbee Bridge Pro to give you more possibility to create various scene linkages. It can also command Alexa, Google Assistant and SmartThings to voice control your home.
Documents
Additional information
| Weight | 60 g |
|---|---|
| Dimensions | 64 × 64 × 35 mm |
| Modeal | ZB Bridge-P |
| Input | 5V DC 1A |
| Wireless connections | Wi-Fi IEEE 802.11 b/g/n 2.4GHZ, Zigbee 3.0 |
| Working environment | -10ºC-40ºC |
| Material | PC V0 |
Customer Reviews
Les résultats de ce produit sont très satisfaisante, il est super bien. J'encourage les gens à le commander pour rendre leur maisons smart.
O produto chegou perfeitamente conforme o esperado. Atendeu muito bem o esperado e já está conectado ao sistema ewelink e funcionando perfeitamente.
This is good buy and easy to setup
Funzionamento perfetto, collegamento immediato seguendo le istruzioni fornite.
Works very good
Easy setup and stable connection in my house.
Powered with Fritz! usb out.
I liked the possibility to.turn off leds
Well... I decided to purchase 6 TH and 6 Motion sensors alongside the ZB Bridge pro. I do run many sonoff wifi devices since years. I beleive there are issues, can be eliminated mostly by FW update and Ewelink development.
Number of devices:
It is declared that 26 devices can be connected diretly 10 end and 10 bridge type. Why I cannot chose these numbers in settings???? It is also not declared how to achive 128 devices. What is declared:10 end device + 16 bridge device which can connect 20-32 end device in plus... this is stil only 46-52 devices total. Or does this mean ONE bridge device can handle 20-32 end device?
Connection:
Pairing several "same as" devices is a pain as there is hard identify them after pairing! (yes you mas test motion but wait 1 min after each, or wait for temp delay, etc... it may be easy with door open sensor). Also why the hell I have to wait 180 min to confirm the pairing - pushing next will quit pairing insted pairing the already recognized devices... So there are scenarios programmers may develop.
Radio power:
living in a one floor "modern" brick house in the countryside (so disturbances are low or non exist) and I find difficult to maintain connection with end devices. Had to test several scenarios to manage working and responsive network. As experienced the Pro? Bridge is working about 40-60% lower than any other bluetooth device. As a comparison my cheap china made ODB II car adapter is visible in the house from my garage - which is a separate bilding next to the house. If there is a room by HW there should be a setting in the FW. I know this problem is dependent on the end device capabilities too, but something has to be made with this as this makes the biggest pain in the usage... I beleive even more frequent battery replacement would be acceptable by many.
The other things like scenes I do not mind as I use different non sonoff related solutions (mainly HA and Google). Anyways, I do like sonoff and will try to keep my IOT rande homogene by brand so I hope that there will be further development and there will be consideration about above issues with next FW updates. I also miss a good vibration detect end device next to the present ones.
it only allows to connect 11 devices. and besides... what is the use of marking that one is not in the house... so that when it is activated, the bridge that cannot be heard makes a beep. I thought that another switch could be activated that has a siren connected, for example. very bad product
About the ZBBridge-P, you can add 128 sub-devices in total, but there is a limitation when you pair the devices directly to the ZB bridge P, please kindly check the below information:
You can add 10 Zigbee end devices directly to the ZBBridge-P. End devices like our SNZB-01,SNZB-02, SNZB-03, SNZB-03 and ZBMINI-L .
You can also add 16 sub-router devices directly to the ZBbridge-P. Sub-router devices like our BASICZBR3, ZBMINI, S26R2ZB, S31 Lite ZB, S40 Lite ZB, and so on.
Or you can add a total of 26 sub-router devices directly to the ZBbridge-P
If you want to add more Zigbee end devices to the ZBbridge-P, you can add a sub router device between them, so the ZBbridge P can support adding more Zigbee end devices.
The signal range with the same ZB devices is NOT as good as the first Sonoff Zigbee Bridge.
The IOS app status (Armed/Disarmed) takes up too much real estate leaving only 1-2 lines for subdevices.
Other than this, an overall good update in terms of functions
New Arrival
-
NewSONOFF ZBMINI Extreme Zigbee Smart Switch ZBMINIL2 (No Neutral Required)
$13.99 Add to cart -
NewSONOFF MINI Extreme Wi-Fi Smart Switch (Matter-enabled)
$12.90 Add to cart -
NewSONOFF Zigbee Temperature and Humidity Sensor | SNZB-02P
$10.90 Add to cart -
NewSONOFF Zigbee Thermostatic Radiator Valve
$26.90 Add to cart -
Sale!
NewSONOFF BASICR4 Wi-Fi Smart Switch
$4.85 Add to cart
