SONOFF Zigbee 3.0 USB Dongle Plus
Free Standard Shipping on SONOFF Orders Over $89
- Pre-flashed with Z-Stack 3.x.0 coordinator firmware
- Can use ZHA in Home Assistant or use Zigbee2MQTT
- Base on TI CC2652P + CP2102N
- +20dBm output gain
- SMA interface external antenna
- Aluminum housing effectively reduces signal interference from peripherals
- Optional 1.5m USB extension cable for better signal range
SONOFF Zigbee 3.0 USB Dongle Plus can works with the devices below:
Router: ZBMINI smart switch, S40 Lite ZB smart plug, S31 Lite ZB smart plug, S26R2ZB smart switch
End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor
SONOFF Zigbee 3.0 USB Dongle Plus is a universal Zigbee USB stick. It can be used as a universal Zigbee gateway in Home Assistant or other open-source platforms via ZHA or Zigbee2MQTT to locally control all your Zigbee sub-devices, so you don't need to invest in the Zigbee hubs for different brands, all you need is a universal gateway - Dongle Plus!
The dongle plus has a wide range of supported devices, such as BASICZBR3, S31 Lite zb, SNZB01, SNZB02, SNZB03, SNZB04, ZBMINI, S26R2ZB , and various sub-devices from various brands or flash router firmware to extend the network range.
The limits of ZBDongle Plus are 21 direct children and up to 40 children (Default values from official firmware).
If you want to connect to 50 direct children and up to 200 children, flash the latest firmware by yourself. Please refer to this link: Z-Stack-firmware/coordinator at master · Koenkk/Z-Stack-firmware · GitHub
Package includes :
1 * Zigbee 3.0 USB Dongle Plus
1 * Antenna
1 * User Manual
|Dimensions||111 × 40 × 17 mm|
DC 5V (100mA Max)
This is my fourth coordinator, and of the four it's the most stable. I run it with zigbee2mqtt on home assistant with 68 zigbee devices, mostly routers.
Among my other coordinators are the Zbdongle-e, and of the two I would recommend the Zbdongle-p for use with zigbee2mqtt any day.
Works well for me with Zigbee2mqtt and Home Assistant. No problems pairing and using it with 20 different Zigbee devices from a few different manufacturers.
Using dongle with zigbee2mqtt on raspberry4.
I had the legacy zigbee controller before. It was unstable and slow. I thought that the technology itself is buggy but that was a mistake. Whet I got this one I got the full network of devices at high speed and zero error rate. Thanks, I trust the technolog again!
I ordered Sonoff Zigbee 3.0 USB Dongle Plus with the USB extension cable and got it working with Raspberry Pi 4 running Home Assistant. The device was also automatically discovered in ZHA, but I chose to use Zigbee2MQTT because it has better device support. I would highly recommended this product if you want to add Zigbee devices to your Home Assistant system.
I purchased the Sonoff Zigbee 3.0 USB Dongle Plus with a SNZB-04 Door/Window sensor. The order was delivered promptly, with tracking. When I received the order, it worked out of the box with Home Assistant using the ZHA integration. I am very pleased with the value and performance of these products.
I ordered two of these, flashed one as a router and kept the other as the coordinator. It appeared to already have the latest firmware. As I previously had a CC2531 configured on my home assistant, it was just a matter of unplugging the old dongle, changing the configuration port to /dev/ttyUSB0 and plugging in the new one. The signal link quality across the entire network has improved. No more laggy behaviours or missing temperature reading. Have 30+ devices on the network. This week I put the second one as a repeater to make the signal stronger and the mesh more resilient. So far so good
did firmware update (via terminal) and works with mqtt2zigbee
Plugged the dongle and USB-extension cable to my VMware host, did USB-passthrough to virtual machine and start Zigbee2MQTT Docker container. So far everything just works, as they should. Can finally change my home automation away from the previous proprietary setup.
SONOFF ZBMINI Extreme Zigbee Smart Switch ZBMINIL2 (No Neutral Required)$13.99 Add to cart
SONOFF NSPanel Pro Smart Home Control PanelSelect options
SONOFF TH Origin Smart Temperature and Humidity Monitoring Switch (TH10/16 Upgrade Version)$13.49 – $15.99 Select options
SONOFF SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor$12.99 Add to cart
SONOFF TH Elite Smart Temperature and Humidity Monitoring Switch$16.99 – $19.99 Select options
Zigbee 3.0 USB Dongle Plus–ZBDongle-E$19.90 Add to cart