SONOFF Zigbee 3.0 USB Dongle Plus


 Free Standard Shipping on SONOFF Orders Over $89

  • Pre-flashed with Z-Stack 3.x.0 coordinator firmware
  • Can use ZHA in Home Assistant or use Zigbee2MQTT
  • Base on TI CC2652P + CP2102N
  • +20dBm output gain
  • SMA interface external antenna
  • Aluminum housing effectively reduces signal interference from peripherals
  • Optional 1.5m USB extension cable for better signal range

SONOFF Zigbee 3.0 USB Dongle Plus can works with the devices below:

Router: ZBMINI smart switch, S40 Lite ZB smart plug, S31 Lite ZB smart plug, S26R2ZB smart switch
End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor

Frequently Bought Together
SONOFF Zigbee Smart Plug| iPlug Series S40 Lite
Plug Type
Secure Payment:

Customer Service Guarantee

  How to add Zigbee devices to home assistant via SONOFF zigbee 3.0 USB dongle plus.

SONOFF Zigbee 3.0 USB Dongle Plus is a universal Zigbee USB stick. It can be used as a universal Zigbee gateway in Home Assistant or other open-source platforms via ZHA or Zigbee2MQTT to locally control all your Zigbee sub-devices, so you don't need to invest in the Zigbee hubs for different brands, all you need is a universal gateway - Dongle Plus!

The dongle plus has a wide range of supported devices, such as BASICZBR3, S31 Lite zb, SNZB01, SNZB02, SNZB03, SNZB04, ZBMINI, S26R2ZB , and various sub-devices from various brands or flash router firmware to extend the network range.

The limits of ZBDongle Plus are 21 direct children and up to 40 children (Default values from official firmware).
If you want to connect to 50 direct children and up to 200 children, flash the latest firmware by yourself. Please refer to this link: Z-Stack-firmware/coordinator at master · Koenkk/Z-Stack-firmware · GitHub

Package includes :

1 * Zigbee 3.0 USB Dongle Plus
1 * Antenna
1 * User Manual


User Manual

Firmware Flashing Guide

Additional information

Weight 50 g
Dimensions 111 × 40 × 17 mm



Working temperature



DC 5V (100mA Max)


Zigbee 3.0

Shell material

Alumium alloy

Customer Reviews

Based on 238 reviews
Terrence Plunkett

Passed it through to HomeAssistant and it worked as expected.

Andrey Okun
Haven't received my order

Ordered 2 items, haven't received anything, tracking code just stucked in "transfer" and then disappeared.

Sorry for all the inconvenience caused to you.
We sent the parcel on Oct. 11th by carrier Buylogic. The delay of the shipment should be caused by a lot of factors like customs clearance, bad weather, etc... In order not to keep you waiting for a long time, we have sent you an email and offer you two solutions, a refund or a replacement. Please check your inbox mail and reply to us so that we can help you to solve the problem.

Most stable Zigbee coordinator

This is my fourth coordinator, and of the four it's the most stable. I run it with zigbee2mqtt on home assistant with 68 zigbee devices, mostly routers.
Among my other coordinators are the Zbdongle-e, and of the two I would recommend the Zbdongle-p for use with zigbee2mqtt any day.

Sebastian S
Works well

Works well for me with Zigbee2mqtt and Home Assistant. No problems pairing and using it with 20 different Zigbee devices from a few different manufacturers.

Andreas Loeffler
Works as expected

Using dongle with zigbee2mqtt on raspberry4.

Aleksandr Artemev
Best for it's price

I had the legacy zigbee controller before. It was unstable and slow. I thought that the technology itself is buggy but that was a mistake. Whet I got this one I got the full network of devices at high speed and zero error rate. Thanks, I trust the technolog again!

Works just as intended.

I ordered Sonoff Zigbee 3.0 USB Dongle Plus with the USB extension cable and got it working with Raspberry Pi 4 running Home Assistant. The device was also automatically discovered in ZHA, but I chose to use Zigbee2MQTT because it has better device support. I would highly recommended this product if you want to add Zigbee devices to your Home Assistant system.

Jim E
Works out of the box

I purchased the Sonoff Zigbee 3.0 USB Dongle Plus with a SNZB-04 Door/Window sensor. The order was delivered promptly, with tracking. When I received the order, it worked out of the box with Home Assistant using the ZHA integration. I am very pleased with the value and performance of these products.

Working well - delivery was quick

I ordered two of these, flashed one as a router and kept the other as the coordinator. It appeared to already have the latest firmware. As I previously had a CC2531 configured on my home assistant, it was just a matter of unplugging the old dongle, changing the configuration port to /dev/ttyUSB0 and plugging in the new one. The signal link quality across the entire network has improved. No more laggy behaviours or missing temperature reading. Have 30+ devices on the network. This week I put the second one as a repeater to make the signal stronger and the mesh more resilient. So far so good

Igor Surini
works great

did firmware update (via terminal) and works with mqtt2zigbee

SONOFF Zigbee 3.0 USB Dongle Plus
    Your Cart
    Your cart is emptyReturn to Shop