PRODUCT PREVIEW: NEXTION IN AN ARDUINO PROJECT (2)
In previous blog, we’ve given a simple example of Nextion. In this blog, we will show you how to apply Nextion in an Arduino project. Hardware we use Nextion 2.4″ Iteaduino UNO Rotary Potentiometer Brick Click here to download the HMI file. Demonstration... read moreNEXTION HMI UPLOAD PROTOCOL
Many customers use the Nextion display in their own business projects. They may need to upload the Nextion firmware through their own MCU. Here we disclose the upload protocol and release the Arduino upload library. Users need to know nothing about the protocol if... read moreWHAT ARE NEW TRIGGER MODES FOR MINI’S EXTERNAL SWITCH?- EDGE MODE
Edge mode, one of three new trigger modes, is intended for making the load state change with each press of the switch button without having to check the on/off state from the switch button. Overview: First off, an important question is here for you – Do you know... read moreTO DRIVE ITEAD PN532 NFC MODULE WITH RASPBERRY PI (OBSOLETE BLOG)
ITEAD PN532 NFC module is equipped with a double-row pin, which can be connected directly to the Raspberry Pie via connection cable and then drive the module for non-contact near field communication operations, such as reading and writing 13.56M IC card with our ITEAD... read moreITEAD WIFI ROBOT PANEL
Previously we released software “ITEAD Bluetooth Robot Panel” to simulate the operation interface for remote control of intelligent car/robot, which provided eight directional buttons, four function buttons, a governor bar and a toggle switch. Users can... read more
