Customer Reviews

Based on 16 reviews
13%
(2)
69%
(11)
13%
(2)
0%
(0)
6%
(1)
G
Graham Bollan
Almost excellent

I bought two of these devices to supply drip feeds. Mechanically robust with quality materials any problems lie in the software. Setup using the capacity measure was far from intuitive and I had to stumble across the fact that scenes was the only way to go. Being aware of the possibility of problems when the batteries fail I would think that a battery condition indicator should be on show rather than buried in the menu system.
Overall they work and work well, I am undoubtedly saving water as well as achieving some automation.

m
mario Vece
Ottimo

Prodotto soddisfacente consigliato ai miei amici

m
mario Vece
Ottimo

Prodotto soddisfacente consigliato ai miei amici

R
Richard Millicer
Hardware good. Software not so much.

I bought two and found plumbing installation and ZB pairing straightforward. Nice appearance too. I have not measured the accuracy of the water meter but figure it's good enough if the plants are happy.
Hopefully battery life is good but I shall monitor charge status in app to not be caught out with insufficient power to operate valve. I understand the complaint by some that the default (unpowered) state of the valve is not OFF. But I am mindful of engineering dilemmas in the design. If the unpowered (or insufficient power) default must be OFF, then that can be achieved only with a mechanism such as a spring, magnet or weight. Constant power would then be needed for the valve to remain ON for the duration of irrigation - hardly a battery friendly solution. There are also complaints that there is no WiFi option available. However, compared to ZigBee, WiFi is a massively power hungry technology. Neither of these features are feasible propositions for a battery powered water valve that is typically remote from mains power. That's why there are many handyman installed, WiFi enabled, default OFF but wired 24VAC systems to choose from.
I do have some serious complaints about the software though. The implementation is not intuitive and does not follow the pattern of most Sonoff switches. This is a latching switch after all! The Schedule and Cycling options are most confusing (to me) and do not offer time of day or day of week. I would like an inching option too. I have thus chosen to use only Capacity and Single Irrigation when I think the plants need water, until the software improves.

R
Richard Millicer
Hardware good. Software not so much.

I bought two and found plumbing installation and ZB pairing straightforward. Nice appearance too. I have not measured the accuracy of the water meter but figure it's good enough if the plants are happy.
Hopefully battery life is good but I shall monitor charge status in app to not be caught out with insufficient power to operate valve. I understand the complaint by some that the default (unpowered) state of the valve is not OFF. But I am mindful of engineering dilemmas in the design. If the unpowered (or insufficient power) default must be OFF, then that can be achieved only with a mechanism such as a spring, magnet or weight. Constant power would then be needed for the valve to remain ON for the duration of irrigation - hardly a battery friendly solution. There are also complaints that there is no WiFi option available. However, compared to ZigBee, WiFi is a massively power hungry technology. Neither of these features are feasible propositions for a battery powered water valve that is typically remote from mains power. That's why there are many handyman installed, WiFi enabled, default OFF but wired 24VAC systems to choose from.
I do have some serious complaints about the software though. The implementation is not intuitive and does not follow the pattern of most Sonoff switches. This is a latching switch after all! The Schedule and Cycling options are most confusing (to me) and do not offer time of day or day of week. I would like an inching option too. I have thus chosen to use only Capacity and Single Irrigation when I think the plants need water, until the software improves.

I
Ian Harrison
Works great.

Out of the box, added batteries, and discovered I through my Zigbee2MQTT network, and then got it working using Node-red so works a treat.
Aonly other test is battery life but that will take time.

I
Ian Harrison
Works great.

Out of the box, added batteries, and discovered I through my Zigbee2MQTT network, and then got it working using Node-red so works a treat.
Aonly other test is battery life but that will take time.

B
Bill Soper
Nice but needs fw update

Pairs and works well in Home Assistant using ZHA. However only one entity is exposed, On/Off. Please update fw to expose the other entities please.
For now I use a ESP32 aware external flow meter.

B
Bill Soper
Nice but needs fw update

Pairs and works well in Home Assistant using ZHA. However only one entity is exposed, On/Off. Please update fw to expose the other entities please.
For now I use a ESP32 aware external flow meter.

T
Theo HARBERS

Nice design and long battery life, with the disadvantage of bi-stable water walve that stays open or closed when out of power. Supported by Zigbee2MQTT but the flow rate always reports 0. Would be nice if it kept track of total water usage instead.

12

SONOFF Zigbee Smart Water Valve

USD$26.90

Free Standard Shipping on Orders over $89

【Easy Installation】Simply connect the Zigbee Smart Water Valve between the faucet and the hose to quickly upgrade your irrigation system in just three minutes, automatically watering your lawn, garden, vegetable patch, and more.
【Customize Suitable Irrigation Plans】The Zigbee Smart Water Valve features schedule mode and capacity mode, supporting both single and cyclic irrigation. Allow you to provide more targeted care for your home plants or crops.
【6-month Historical Data Hold】Support checking up to 180 days of water usage and duration through the app. Understand daily, weekly, or monthly data to better control irrigation amounts and save more on water bills.
【Zigbee 3.0 Compatible】 Integrates with Zigbee hubs utilizing the Zigbee 3.0 protocol, such as SONOFF NSPanel Pro, SONOFF iHost, SONOFF ZB Bridge-P, SONOFF ZB Bridge-U, SONOFF ZBDongle-E/-P, Echo Plus 2nd…
【Support Open-source Platforms】The Zigbee Smart Water Valve Integrates into open-source platforms via ZBDongle-P or ZBDongle-E to perform automatic irrigation functions.

Note1: The Zigbee Hub is needed.
Note 2: Batteries not included.
Click to view the differences between NH and BSP (It is for reference only, please choose based on the thread standard you actually use).

Frequently Bought Together
SONOFF Zigbee Water Leak Sensor | SNZB-05P
SONOFF Zigbee Water Leak Sensor | SNZB-05P
SNZB-05P Standard
Clear
Price range: USD$9.90 through USD$15.90
SONOFF Zigbee Bridge Pro
SONOFF Zigbee Bridge Pro
Original price was: USD$24.90.Current price is: USD$19.90.
SONOFF NSPanel Pro Smart Home Control Panel
SONOFF NSPanel Pro Smart Home Control Panel
Color
Clear
Original price was: USD$119.90.Current price is: USD$89.90.
SONOFF iHost Smart Home Hub
SONOFF iHost Smart Home Hub
Product
Clear
Price range: USD$71.90 through USD$99.90
Zigbee 3.0 USB Dongle Plus | ZBDongle-E
Zigbee 3.0 USB Dongle Plus | ZBDongle-E
USD$19.90
SONOFF SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor
SONOFF SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor
USD$12.99
SONOFF Zigbee Temperature and Humidity Sensor | SNZB-02P
SONOFF Zigbee Temperature and Humidity Sensor | SNZB-02P
USD$10.90
Secure Payment:

Customer Service Guarantee

Overview

With SONOFF Zigbee Smart Water Valve, you can automate and control your watering system with ease. It is easy and quick to install, simply connect the Zigbee Smart Water Valve between the faucet and the hose to quickly upgrade your irrigation system in just three minutes, automatically watering your lawn, garden, vegetable patch, and more. Open the eWeLink app, tap the button, and you can start today's irrigation immediately. Set a smart scene for the Zigbee Smart Water Valve to irrigate automatically in the early morning, making your life easier.

The Zigbee Smart Water Valve features schedule and capacity modes, supporting single and cyclic irrigation. Say goodbye to forgotten watering and wasted water sessions, ensuring optimal hydration for your home plants or crops. Whether you're at home or away, our smart water valve provides the perfect amount of water, keeping your plants healthy and vibrant.

The Zigbee Smart Water Valve's battery can be used continuously for 20 months, covering two irrigation cycles(Once a day, for one hour each time). If there is a water shortage during irrigation, the app will immediately send a notification. Support checking up to 180 days of water usage and duration through the app. Understand daily, weekly, or monthly data to better control irrigation amounts and save more on water bills. You can use multiple Zigbee Smart Water Valves to work together, setting different irrigation modes for various areas of your home, and creating a personalized smart irrigation system.

SONOFF Zigbee Smart Water Valve is compatible with Zigbee hubs supporting Zigbee 3.0, including SONOFF iHost, SONOFF NSPanel Pro, ZB Bridge Pro, SONOFF ZB Bridge Ultra, ZBDongle-P, ZBDongle-E, Echo Plus 2nd...

The Zigbee Smart Water Valve supports voice control through Alexa and Google Home. A simple voice command can close the water valve when you think it's about to rain outside. The Zigbee Smart Water Valve can integrate into open-source platforms via ZBDongle-P or ZBDongle-E to perform automatic irrigation functions.

Let's discover the future of lawn care and plant watering with the SONOFF Zigbee smart water valve!

Documents

Video

Language: English

Language: Portuguese

Language: German

Language: Polish

Additional information

Weight N/A
Dimensions N/A
Thread Standard

BSP, NH
Rating

6V(4*1.5V AA)
Wireless connection

Zigbee 3.0
Working temperature

5°C~60°C
Watering temperature

5°C~40°C
Working humidity

5%-95%RH, non-condensing
Waterproof

IP55
Dimension

152x100x46mm
Color

Black
Casing materials

PC+ABS
Working pressure

0.06-0.8MPa

Customer Reviews

Based on 16 reviews
13%
(2)
69%
(11)
13%
(2)
0%
(0)
6%
(1)
G
Graham Bollan
Almost excellent

I bought two of these devices to supply drip feeds. Mechanically robust with quality materials any problems lie in the software. Setup using the capacity measure was far from intuitive and I had to stumble across the fact that scenes was the only way to go. Being aware of the possibility of problems when the batteries fail I would think that a battery condition indicator should be on show rather than buried in the menu system.
Overall they work and work well, I am undoubtedly saving water as well as achieving some automation.

m
mario Vece
Ottimo

Prodotto soddisfacente consigliato ai miei amici

m
mario Vece
Ottimo

Prodotto soddisfacente consigliato ai miei amici

R
Richard Millicer
Hardware good. Software not so much.

I bought two and found plumbing installation and ZB pairing straightforward. Nice appearance too. I have not measured the accuracy of the water meter but figure it's good enough if the plants are happy.
Hopefully battery life is good but I shall monitor charge status in app to not be caught out with insufficient power to operate valve. I understand the complaint by some that the default (unpowered) state of the valve is not OFF. But I am mindful of engineering dilemmas in the design. If the unpowered (or insufficient power) default must be OFF, then that can be achieved only with a mechanism such as a spring, magnet or weight. Constant power would then be needed for the valve to remain ON for the duration of irrigation - hardly a battery friendly solution. There are also complaints that there is no WiFi option available. However, compared to ZigBee, WiFi is a massively power hungry technology. Neither of these features are feasible propositions for a battery powered water valve that is typically remote from mains power. That's why there are many handyman installed, WiFi enabled, default OFF but wired 24VAC systems to choose from.
I do have some serious complaints about the software though. The implementation is not intuitive and does not follow the pattern of most Sonoff switches. This is a latching switch after all! The Schedule and Cycling options are most confusing (to me) and do not offer time of day or day of week. I would like an inching option too. I have thus chosen to use only Capacity and Single Irrigation when I think the plants need water, until the software improves.

R
Richard Millicer
Hardware good. Software not so much.

I bought two and found plumbing installation and ZB pairing straightforward. Nice appearance too. I have not measured the accuracy of the water meter but figure it's good enough if the plants are happy.
Hopefully battery life is good but I shall monitor charge status in app to not be caught out with insufficient power to operate valve. I understand the complaint by some that the default (unpowered) state of the valve is not OFF. But I am mindful of engineering dilemmas in the design. If the unpowered (or insufficient power) default must be OFF, then that can be achieved only with a mechanism such as a spring, magnet or weight. Constant power would then be needed for the valve to remain ON for the duration of irrigation - hardly a battery friendly solution. There are also complaints that there is no WiFi option available. However, compared to ZigBee, WiFi is a massively power hungry technology. Neither of these features are feasible propositions for a battery powered water valve that is typically remote from mains power. That's why there are many handyman installed, WiFi enabled, default OFF but wired 24VAC systems to choose from.
I do have some serious complaints about the software though. The implementation is not intuitive and does not follow the pattern of most Sonoff switches. This is a latching switch after all! The Schedule and Cycling options are most confusing (to me) and do not offer time of day or day of week. I would like an inching option too. I have thus chosen to use only Capacity and Single Irrigation when I think the plants need water, until the software improves.

I
Ian Harrison
Works great.

Out of the box, added batteries, and discovered I through my Zigbee2MQTT network, and then got it working using Node-red so works a treat.
Aonly other test is battery life but that will take time.

I
Ian Harrison
Works great.

Out of the box, added batteries, and discovered I through my Zigbee2MQTT network, and then got it working using Node-red so works a treat.
Aonly other test is battery life but that will take time.

B
Bill Soper
Nice but needs fw update

Pairs and works well in Home Assistant using ZHA. However only one entity is exposed, On/Off. Please update fw to expose the other entities please.
For now I use a ESP32 aware external flow meter.

B
Bill Soper
Nice but needs fw update

Pairs and works well in Home Assistant using ZHA. However only one entity is exposed, On/Off. Please update fw to expose the other entities please.
For now I use a ESP32 aware external flow meter.

T
Theo HARBERS

Nice design and long battery life, with the disadvantage of bi-stable water walve that stays open or closed when out of power. Supported by Zigbee2MQTT but the flow rate always reports 0. Would be nice if it kept track of total water usage instead.

12

New Arrival

Related products

SONOFF Zigbee Smart Water Valve
SONOFF Zigbee Smart Water Valve
USD$26.90
-
+
Add To Cart