Zigbee 3.0 USB Dongle Plus–ZBDongle-E
Free Standard Shipping on SONOFF Orders Over $89
- Pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3 out of box
- Support smart home platforms like Home Assistant, openHAB, Zigbee2MQTT and so on
- Based on EFR32MG21
- +20dBm output gain
- Aluminum housing effectively reduces signal interference from peripherals
- Optional 1.5m USB extension cable for better signal range
Note: The ZBDongle-E supports the Green Power devices, If you want to add the Hue Zigbee Green Power device, you need to switch the channel of ZBDongle-E to 11/15/20/25 at your specific application.
SONOFF Zigbee 3.0 USB Dongle Plus can works with the devices below:
Router: ZBMINI smart switch, S40 Lite ZB, S31 Lite ZB smart plug, S26R2ZB smart switch
End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor
Click to view the difference between Dongle-E and Dongle-P
SONOFF ZBDongle-E is a universal Zigbee USB stick. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices, so you don't need to invest in different brands' Zigbee hubs, all you need is a universal gateway - Dongle Plus!
The dongle plus has a wide range of supported devices, such as ZBMINI-L, SNZB01, SNZB02, SNZB03, SNZB04, S26R2ZB, S40 LITE ZB. Dongle Plus is pre-flashed with coordinator firmware, you can also flash router firmware to extend the network range.
Dongle Plus support a variety of common systems, like Linux, Ubuntu, Raspbian, Windows, macOS (Windows and macOS require corresponding driver installation).
|Dimensions||111 × 40 × 17 mm|
DC 5V (100mA Max)
This was incredibly easy to setup on my Raspberry Pi4 running the latest Home Assistant. The installation was simple and it connected on the first try. My only advice is that you get a USB extension cable to connect it to your Raspberry Pi, or it will block some of your other ports... it's kind of big due to the heatsink-case.
Didn't have a single issue using this or setting up new devices on a Raspberry Pi 4B running Home Assistant OS. For the price, definitely recommend it. Haven't done range testing, but seems to work fine in a "regular-sized" house with low-power devices like door/window sensors and temperature/humidity sensors.
Works without a hitch with home assistant and ZHA, no flashing necessary
Switched over from conbee to this one. Good choice, with zigbee2mqtt perfect match for my automation
Bought this after a review on YouTube from a Chanel I subscribed to. Using it with Z2M and a full house which is controlled bij Zigbee it has to be flawless and it isn't unfortunately. When you want to bind groups with controllers like switches it doesn't work. Also flashing doesn't work like the manual describes. After many attempts and trail and errors I managed to get the newer software installed. For now I will stick with the predecessor and leave this stick for what it is.
Very satisfied with both purchase, delivery and installation process. Great well produced product, perfect for my Zigbee2Mqtt in HomeAssistant. Have been running since I received it in my mailbox (on time). Will most certainly shop at ITead again.
Replacement for my Conbee II. Not that the Conbee II is bad, but with Zigbee2MQTT it might introduce latencies etc. I simply found many good review on this Sonoff product.
Anyway, so far rock solid performance, good radio-transmissions and instance response across all devices inside & outside the house.
Works perfectly with home-assistant.
Seems to be working nicely with z2m. Reasonable price.
Has a lot of bugs with zigbee 2 mqtt, devices get disconnected, can't get information from devices, interview process repeats for single device after each half an hour
We apologize for the negative user experience; to make sure we can completely fix the problem for you, I have contacted you thru email to gain info about the bugs, please check your inbox.
SONOFF ZBMINI Extreme Zigbee Smart Switch ZBMINIL2 (No Neutral Required)$13.99 Add to cart
SONOFF NSPanel Pro Smart Home Control PanelSelect options
SONOFF TH Origin Smart Temperature and Humidity Monitoring Switch (TH10/16 Upgrade Version)$13.49 – $15.99 Select options
SONOFF SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor$12.99 Add to cart
SONOFF TH Elite Smart Temperature and Humidity Monitoring Switch$16.99 – $19.99 Select options
Zigbee 3.0 USB Dongle Plus–ZBDongle-E$19.90 Add to cart