Sale!
Hot
-10%

SONOFF Zigbee 3.0 USB Dongle Plus

$17.90

SONOFF Black Friday Sale:

$10 OFF $69+ with Code BF10 | $15 OFF $99+ with Code BF15 | $30 OFF $159+ with Code BF30
Extra Free Standard Shipping on SONOFF Orders Over $89, valid until Dec 10.

  • Pre-flashed with Z-Stack 3.x.0 coordinator firmware
  • Can use ZHA in Home Assistant or use Zigbee2MQTT
  • Base on TI CC2652P + CP2102N
  • +20dBm output gain
  • SMA interface external antenna
  • Aluminum housing effectively reduces signal interference from peripherals
  • Optional 1.5m USB extension cable for better signal range

SONOFF Zigbee 3.0 USB Dongle Plus can works with the devices below:

Router: ZBMINI smart switch, S40 Lite ZB smart plug, S31 Lite ZB smart plug, S26R2ZB smart switch
End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor

Frequently Bought Together
1.5M USB Male to Female Extension Cable
$1.99
SONOFF ZBMINI Extreme Zigbee Smart Switch ZBMINIL2 (No Neutral Required)
ZBMINIL2 Bundle
Clear
$12.59 – $22.41
SONOFF SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor
$11.69
SONOFF SNZB-01 - Zigbee Wireless Switch
$7.99
SONOFF SNZB-02 - Zigbee Temperature and Humidity Sensor
$8.49
SONOFF SNZB-03 - Zigbee Motion Sensor
$8.54
SONOFF SNZB-04 - Zigbee Wireless door/window sensor
$7.64
SONOFF Zigbee Smart Plug| iPlug Series S40 Lite
Plug Type
Clear
$12.90
Secure Payment:

Customer Service Guarantee

  How to add Zigbee devices to home assistant via SONOFF zigbee 3.0 USB dongle plus.

SONOFF Zigbee 3.0 USB Dongle Plus is a universal Zigbee USB stick. It can be used as a universal Zigbee gateway in Home Assistant or other open-source platforms via ZHA or Zigbee2MQTT to locally control all your Zigbee sub-devices, so you don't need to invest in the Zigbee hubs for different brands, all you need is a universal gateway - Dongle Plus!

The dongle plus has a wide range of supported devices, such as BASICZBR3, S31 Lite zb, SNZB01, SNZB02, SNZB03, SNZB04, ZBMINI, S26R2ZB , and various sub-devices from various brands or flash router firmware to extend the network range.

The limits of ZBDongle Plus are 21 direct children and up to 40 children (Default values from official firmware).
If you want to connect to 50 direct children and up to 200 children, flash the latest firmware by yourself. Please refer to this link: Z-Stack-firmware/coordinator at master · Koenkk/Z-Stack-firmware · GitHub

  • Install Driver

Note: Raspberry Pi (Linux) is recommended, if you use Windows or macOS, you need to install Driver first.

Windows:  CP210x_Windows_Drivers_with_Serial_Enumeration

Package includes :

1 * Zigbee 3.0 USB Dongle Plus
1 * Antenna
1 * User Manual

Documents:

User Manual

Firmware Flashing Guide

Additional information

Weight 50 g
Dimensions 111 × 40 × 17 mm
Brand

Model

ZBDongle-P
Working temperature

-10℃-40℃
Input

DC 5V (100mA Max)
Wireless

Zigbee 3.0
Shell material

Alumium alloy

Customer Reviews

Based on 244 reviews
86%
(210)
5%
(11)
2%
(6)
2%
(4)
5%
(13)
S
Sérgio Azevedo

Good range and very small. No problems using with Home Assistant inside ProxMox.

r
rrr

works well, as expected

J
Jonny Suarez
Excelente producto

El producto tal cual como la descripción, envío muy rápido.

Recomendados !!!!!

F
Frantisek
Works fine with zigbee2mqtt

Delivered within 2.5 weeks to SK.
Works as expected with zigbee2mqtt and Domoticz. Followed the procedure for coordinator fw flashing and migration from other adapter (to replace my old cc2531 adapter). All devices were kept after migration, just required repairing. All is working fine since then.

F
Frederico
Happy but tech support does not reply

Bought 2 units to have zha and z2m at same time in hass. I already had another one that is acting as router.
All works fine, but I can not use as intended because the units have the exact name so when os reboots the usb get frequently swapped and given the names are the same I can not use serial by it to make them persistent.
2 weeks without tech support response about this.
I have 58 devices under 1 coordinator and all is good.

A
Alakszai Andras

Works with Z2M without problem. Delivered to Hungary in days . Congrats.

T
Terrence Plunkett
Works

Passed it through to HomeAssistant and it worked as expected.

A
Andrey Okun
Haven't received my order

Ordered 2 items, haven't received anything, tracking code just stucked in "transfer" and then disappeared.

Sorry for all the inconvenience caused to you.
We sent the parcel on Oct. 11th by carrier Buylogic. The delay of the shipment should be caused by a lot of factors like customs clearance, bad weather, etc... In order not to keep you waiting for a long time, we have sent you an email and offer you two solutions, a refund or a replacement. Please check your inbox mail and reply to us so that we can help you to solve the problem.

T
T.J.
Most stable Zigbee coordinator

This is my fourth coordinator, and of the four it's the most stable. I run it with zigbee2mqtt on home assistant with 68 zigbee devices, mostly routers.
Among my other coordinators are the Zbdongle-e, and of the two I would recommend the Zbdongle-p for use with zigbee2mqtt any day.

S
Sebastian S
Works well

Works well for me with Zigbee2mqtt and Home Assistant. No problems pairing and using it with 20 different Zigbee devices from a few different manufacturers.

123

New Arrival

Related products

SONOFF Zigbee 3.0 USB Dongle Plus
$17.90
-
+
Add To Cart