SONOFF T2EU-RF – Wall Panel Sticky 433MHz Wireless RF Remote 1-3 Gang

SONOFF T2EU-RF Descriptions:

Does the 433MHz wireless stick-on smart wall switch is the extended new arrival of SONOFF’s best-selling TX series Wi-Fi Wall Smart Switch? No. It continues the similar look with TX series to keep your home style modern and artistic, and is actually a 433MHz remote controller.

Does your home be full of hard-to-reach light switches? Or the light switch at the end of a dark corridor is out of convenient reach for operation of control at night? If that’s true, you need match a removable remote controller to your lights.

The remote controller with 1/2/3-gang works like other regular light switches but add the ability to control the connect lights from a distance, and no required to wire, simply stick on it to use. The multiple gangs allow you to realize two remote control solutions, one SONOFF remote controller for control multiple lights controlled and multiple SONOFF remote controllers for a light controlled. Plus, the remote controller can be used to connect with SONOFF T1/T2/T3 wall switch to achieve two-way control. It is also used for RFR2, 4CHPROR3 and SlampherR2 which provides you one more control way except for APP remote control and voice control. The backlight is designed on the touch button to give you a clear location to control the light at night. The absorbing energy from light decides the brightness of backlight, the more energy it absorbs, the higher its brightness. Three using methods can be chosen from stick-on, screw-on and desk-top.

The device only supports pairing on button at a time, below is the details for RF pairing and clearing method:

Pairing Method: Long press the touch button you want to pair for 3s until you hear a “beep” sound and release, then press the corresponding button on the RF remote controller, and you will hear a “beep” sound again after successful pairing. Other buttons can be paired through this method.
Clearing Method: Long press the touch button you want to clear for 5s until you hear two “beep” sounds and release, then press the corresponding button on the RF remote controller, and you will hear a “beep” sound again after successful clearing. Other buttons can be cleared through this method.

Documents:

• User Manual, Quick Installation Guide, Certification