Colorduino V1.4 Color Rainbow Matrix RGB LED Driver Shield For Arduino
89 in stock
The Colorduino is a RGB LED matrix driver platform basis on Arduino UNO (ATmega328P). It gains three 8+6-bit channels of hardware PWM control of the LED’s. This design is to make user easily modify or write the firmware of Colorduino by Arduino IDE.
89 in stock
Colorsduino is a magic RGB LED dot-matrix driver compatible with Arduino . Colorsduino pairs the M54564 with a single DM163 constant current driver. By using the DM163, Colorduino gains three 8+6-bit channels of hardware PWM control of the LED's freeing up the MCU from having to implement it in software. This gives the ATmega328 more CPU bandwidth for performing other tasks. Colorduino is easy to cascade by IIC and Power interface.
Note: 1.4 version has been removed the switch compared to 1.3 version.
8bits colors support with 6bits correction for each color in every dots
Hardware 16MHz PWM support
Without any external circuits, play and shine
Dedicated GPIO and ADC interface
Hardware UART and IIC communication with easy cascading
24 constant current channels of 100mA each
8 super source driver channels of 500mA each
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.
For technical support, please open a ticket on Itead Support System.
|Dimensions||60 × 60 × 1.6 mm|
5V~7.5V DC(7.5V Max)
|Cascade power connector||
100mil bended pin header pair