Latest Articles

134.2kHz RFID reader module : RDM660

RDM660 is designed for reading code from 134.2KHz card or tags . It support HTS-H32、HTS-48、HTS-56 type card and tag , compatible with ISO11784/85 protocol. It’s similar to RDM630 125kHz RFID reader module , nearly the same pins and the same output protocol, user just...

How to Use New Components in Nextion Editor V0.26

We are happy that our Nextion Editor have been upgraded to V0.26. In this new version, there are two new components added. They are slider component and waveform component. In this blog, we will teach you to use these two components . We hope our examples will...

Hot Posts This Week

PSF-B04 Application Guide

1.Product Introduction             PSF-B04 is a 4-channel ultra-low-power Wi-Fi switch module based on ESP8285. It’s specially designed for mobile devices and Internet of Things applications with the most competitive package size and ultra-low energy consumption...

PSF-B01 Application Guide

1.Product Introduction    PSF-B01 is a single-channel ultra-low-power Wi-Fi switch module based on ESP8285. It’s specially designed for mobile devices and Internet of Things applications with the most competitive package size and ultra-low energy consumption...

Redesigned ITEAD STUDIO Website Launch Announcement

To create a better and more user-friendly experience for our customers, ITEAD STUDIO has been fully renovated. and we are proud to announce the release of our renewed website. It goes live on the 31st of May and is located at the same address: https://www.itead.cc/....

NEXTION TUTORIAL-BASED ON NEXTION ARDUINO LIBRARY

Hi,everybody! From this tutorial,you will learn how to use the ITEADLIB_Arduino_Nextion_Library to work with Nextion. There are 3 chapters in the tutorial. At first,you'd better download the Library and HMI files and Nextion Editor below: 1. ITEADLIB Arduino Nextion...

NEXTION ADVANCED APPLICATION 3: SLIDE TO UNLOCK AND BATTERY CHARGING PROGRESS PROJECT

Today we are going to create a practical project-slide to unlock and display the battery charging state. It is a simple but cool project with just four components to be used. Our idea is to slide to unlock the interface, then jump to another interface where users can...

PRODUCT PREVIEW: NEXTION IN AN ARDUINO PROJECT (2)

In previous blog, we've given a simple example of Nextion. In this blog, we will show you how to apply Nextion in an Arduino project. Hardware we use Nextion 2.4" Iteaduino UNO Rotary Potentiometer Brick Click here to download the HMI file. Demonstration Video...

NEXTION HMI UPLOAD PROTOCOL

Many customers use the Nextion display in their own business projects. They may need to upload the Nextion firmware through their own MCU. Here we disclose the upload protocol and release the Arduino upload library. Users need to know nothing about the protocol if...

WHAT ARE NEW TRIGGER MODES FOR MINI’S EXTERNAL SWITCH?- EDGE MODE

Edge mode, one of three new trigger modes, is intended for making the load state change with each press of the switch button without having to check the on/off state from the switch button. Overview: First off, an important question is here for you – Do you know...

TO DRIVE ITEAD PN532 NFC MODULE WITH RASPBERRY PI (OBSOLETE BLOG)

ITEAD PN532 NFC module is equipped with a double-row pin, which can be connected directly to the Raspberry Pie via connection cable and then drive the module for non-contact near field communication operations, such as reading and writing 13.56M IC card with our ITEAD...

ITEAD WIFI ROBOT PANEL

Previously we released software "ITEAD Bluetooth Robot Panel" to simulate the operation interface for remote control of intelligent car/robot, which provided eight directional buttons, four function buttons, a governor bar and a toggle switch. Users can set the data...

Popular How-To Videos

Subscribe For Exclusive Offers, Tips & More