Latest Articles

NRF24L01 SIX CHANNELS TO ONE RECEIVER

nRF24L01 supports multi-channel data receive, so you can use several nRF24L01 node to transmit data to a terminal receiver. We have built a sensor network demo, which uses 6 sensor node and sends the data to one receiver. The operation of controlling nRF24L01 is...

NEXTION WIFI TOUCH DISPLAY

This article was written by Pete Scargill, from Scargill's Tech Blog. April 16 2016 announcement – the project won second prize in the 1st Annual ESP8266 Design Contest over at esp8266.com This award-winning project is a development of previous (home control 2016)...

EWELINK WORKS WITH GOOGLE NEST

In Android 2.5.0, we have optimized some functions to work with Google Nest. Please update to 2.5.0.  Note: iOS eWeLink 2.5.0 and higher versions support to add Google Nest. eWeLink Android Ver2.3.0 starts to support Nest Learning Thermostat. In this post, we will...

RDM6300 ARDUINO DOOR CONTROL SYSTEM

RDM6300 is a 125KHz card reader mini-module designed for reading code from 125KHz RFID card. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. In this blog, we will...

Hot Posts This Week

ITEAD HOLIDAY BREAK NOTICE OF MID AUTUMN FESTIVAL

Mid Autumn Festival is coming, ITEAD will have a holiday to celebrate. We would like to announce our holiday schedule for 2021 Mid Autumn Festival as followers: Holiday will start from September 19th to September 21st, 2021. We will be back to normal on September...

PSF-B04 Application Guide

1.Product Introduction             PSF-B04 is a 4-channel ultra-low-power Wi-Fi switch module based on ESP8285. It’s specially designed for mobile devices and Internet of Things applications with the most competitive package size and ultra-low energy consumption...

PSF-B01 Application Guide

1.Product Introduction    PSF-B01 is a single-channel ultra-low-power Wi-Fi switch module based on ESP8285. It’s specially designed for mobile devices and Internet of Things applications with the most competitive package size and ultra-low energy consumption...

Redesigned ITEAD STUDIO Website Launch Announcement

To create a better and more user-friendly experience for our customers, ITEAD STUDIO has been fully renovated. and we are proud to announce the release of our renewed website. It goes live on the 31st of May and is located at the same address: https://www.itead.cc/....

NEXTION TUTORIAL-BASED ON NEXTION ARDUINO LIBRARY

Hi,everybody! From this tutorial,you will learn how to use the ITEADLIB_Arduino_Nextion_Library to work with Nextion. There are 3 chapters in the tutorial. At first,you'd better download the Library and HMI files and Nextion Editor below: 1. ITEADLIB Arduino Nextion...

NEXTION ADVANCED APPLICATION 3: SLIDE TO UNLOCK AND BATTERY CHARGING PROGRESS PROJECT

Today we are going to create a practical project-slide to unlock and display the battery charging state. It is a simple but cool project with just four components to be used. Our idea is to slide to unlock the interface, then jump to another interface where users can...

PRODUCT PREVIEW: NEXTION IN AN ARDUINO PROJECT (2)

In previous blog, we've given a simple example of Nextion. In this blog, we will show you how to apply Nextion in an Arduino project. Hardware we use Nextion 2.4" Iteaduino UNO Rotary Potentiometer Brick Click here to download the HMI file. Demonstration Video...

NEXTION HMI UPLOAD PROTOCOL

Many customers use the Nextion display in their own business projects. They may need to upload the Nextion firmware through their own MCU. Here we disclose the upload protocol and release the Arduino upload library. Users need to know nothing about the protocol if...

WHAT ARE NEW TRIGGER MODES FOR MINI’S EXTERNAL SWITCH?- EDGE MODE

Edge mode, one of three new trigger modes, is intended for making the load state change with each press of the switch button without having to check the on/off state from the switch button. Overview: First off, an important question is here for you – Do you know...

TO DRIVE ITEAD PN532 NFC MODULE WITH RASPBERRY PI (OBSOLETE BLOG)

ITEAD PN532 NFC module is equipped with a double-row pin, which can be connected directly to the Raspberry Pie via connection cable and then drive the module for non-contact near field communication operations, such as reading and writing 13.56M IC card with our ITEAD...

Popular How-To Videos

Subscribe For Exclusive Offers, Tips & More